Superfine Wool Jersey: What to Look For Before You Commit to a Fall Collection
By Chêne Textile Journal4 min read

Wool is the fabric that forgives you the least in a bad season and rewards you the most in a good one. A fine wool jersey that fits, holds its shape and does not pill by October becomes a repeat item. One that fails at the third wear becomes a return. Most of what separates the two is decided before the first sample is cut.
"Superfine" is a promise, so ask what is behind it
The word describes fibre fineness. Finer wool fibres bend more easily, which is why they feel soft on the skin instead of prickly. For next-to-skin pieces such as base layers, tops and fitted knit dresses, fibre fineness is the first thing to ask about. Ask the mill for the fibre diameter, measured in microns, on the wool actually used for your cloth, and ask whether that is an average or a range. If a supplier cannot tell you, treat the word "superfine" with caution.
Yarn count is the other half. Fine two-ply yarns, noted something like 60Nm/2, give a smooth, even surface and good drape. Coarser yarns, such as 2/28Nm, make a thicker, bulkier fabric with a lot of warmth and a more rustic look. Neither is better. They are for different garments.
Structure decides the garment
- Single jersey. Light, with a clean face. The right choice for fitted tops, layering pieces and dresses that need to drape. It curls at the edges and is a little less stable.
- Interlock. A dense, smooth fabric with a good body. It handles the cutting table well, does not curl, and gives you a tailored feel without bulk. A natural choice for sweatshirts, jackets, trousers and structured dresses.
- Rib. Thick, elastic and very warm. A heavy wool rib works as a main fabric for chunky knits and as a trim for everything else.
Weight follows the structure. A fine jersey at the lower end of the mid-weight range can sit under a coat and feel almost like a second skin. A dense rib at 300 gsm is a cold-weather outer garment. Check the weight you are quoted against the way your customer will wear it, not just the season.
The two problems customers actually complain about
Pilling. Short, loose fibres at the surface rub into small balls, particularly in areas of friction: underarms, cuffs, and where a bag strap sits. Fine fibres, tight yarn twist and good finishing all reduce it. A blend with a smooth fibre such as silk can help. Ask for a pilling result on the finished cloth, and rub-test your own sample.
Shrinkage and felting. Untreated wool can shrink and felt in a hot or agitated wash. Some wool is treated to be machine washable, and the treatment can change the hand, so test the treated version, not a different cloth. If you plan a "hand wash only" label, be sure it is realistic, because many customers will ignore it. Your return rate will tell you the truth.
Blends worth considering
- Wool and silk. Silk gives a gentle glow and a smoother surface, and a slightly cooler touch. A good fit for womenswear with a refined look.
- Wool and cashmere. Cashmere brings softness and warmth. The more you blend in, the softer and more delicate the cloth becomes. Check the pilling and durability on any high-cashmere cloth, especially at lighter weights.
- Multi-fibre blends. Wool with modal, silk and a little stretch can give you layers of hand and better recovery in a single cloth. These are worth a look if your garment has to move.
Print and colour on wool
Wool takes colour with depth, which is why deep tones like forest, claret, cocoa and navy look rich. Printed wool jersey, with leaf motifs or fine dots for instance, is a quieter way to add pattern without going to a loud print. Always ask for a strike-off on the real cloth, because a print looks different on wool than on cotton. Check colourfastness to rubbing and washing, especially for dark colours on pale grounds.
Before you place the order
- Ask for the fibre diameter and the yarn count, and what each means for this cloth.
- Ask for pilling and shrinkage test results on the finished fabric.
- Wash and wear a sample garment yourself for two weeks.
- Confirm the care label with the actual wash method you tested.
- Plan weights for layering. A customer wearing three layers does not need three heavy ones.
Wool does not need to be complicated. It needs the right structure for the garment, honest information about the fibre, and a sample that has been worn, not just photographed.
Fabrics that go with this article
Sample fabrics from our library that match the fibres and uses discussed above.


